ViewSonic X11-4K - Wired LAN Connection

30
Wired LAN Connecon
You can easily connect to wired Internet networks and customize the connecon as
well.
1. Plug the RJ45 cable into the LAN port of the projector, then ensure the other end
is plugged into your wired Internet source.
LAN
LAN
2. Go to: Home > Sengs > Network Sengs > Wired LAN
3. You can Congure the IP automacally or manually. Choosing Manual will allow
access to IP Address, Subnet Mask, Default Gateway, and DNS Server.
NOTE: It is recommended to let the system congure the network sengs
automacally by choosing Automac for Congure IP.