ViewSonic X11-4K - Selecting an Input Source

35
Selecng an Input Source
The projector can be connected to mulple devices at the same me. However, it
can only display one full screen at a me.
AUDIO
OUT
AUDIO
IN
S / PDIF
LAN
SD
MICRO SD
USB 1 (2.0)
5V/1.5A
USB 2 (2.0)
5V/1.5A
USB-C
HDMI 1
HDCP 2.2
HDMI 2
HDCP 2.2
ARC
USB-C
LAN
The projector will automacally search for input sources. If mulple sources are
connected, press the Source buon on the remote control to select the desired
input, or press the Down buon when at the Home Screen unl the source list is
displayed.
NOTE: Ensure the connected sources are also turned on.