ViewSonic X11-4K - Using the Projector; Powering On and Initial Setup

32
Using the Projector
Starng Up the Projector
1. Ensure the projector’s power cord is properly connected to a power outlet.
2. Press the Power buon to turn on the projector.
First Time Acvaon
If the projector is acvated for the rst me, you will need to select your Projecon
Orientaon, Preferred Language, Network Sengs, and Source Input. Follow the
on-screen instrucons using the OK and Up/Down/Le/Right buons on the
remote control. When the “Finish screen” appears, this indicates the projector is
ready to use.
Projecon Orientaon
Select the preferred projecon orientaon and press OK to conrm the selecon.
For more informaon, see page 15.