ViewSonic X11-4K - Adjusting Image and Shutting Down

36
Adjusng the Projected Image
Adjusng the Projector's Height and Projecon Angle
The projector is equipped with one (1) adjuster foot. Adjusng the foot will change
the projector’s height and the vercal projecon angle. Carefully adjust the foot to
ne tune the projected image’s posion.
100% offset 115% offset 130% offset
1
2
1
2
NOTE: If the projector is not placed on a at surface or the screen and the
projector are not perpendicular to each other, the projected image can
become trapezoidal. However, the “Auto Vercal Keystone” funcon will
correct the issue automacally.