ViewSonic X11-4K - Page 76

76
Menu Descripon
Power On Source
Allows the user to enter the desired source directly
aer turning on the projector.
Power On/O Ring Tone Enable or disable the power on/o ring tone.
Auto Power On
CEC
This projector supports CEC (Consumer Electronics
Control) funcon for synchronized power on/o
operaon via HDMI connecon. That is, if a device
that also supports CEC funcon is connected to the
HDMI input of the projector, when the projector’s
power is turned o, the power of the connected
device will also be turned o automacally. When
the power of the connected deice is turned on, the
projector’s power will be turned on automacally.
NOTE: Ensure both the projector’s and the
connected device’s CEC funcon are
turned on. If the projector does not
automacally power on, please turn o
the projector rst, then it will work.
Smart Energy
Auto Power O
The projector can turn o automacally aer a set
period of me once no input source is detected.
Sleep Timer
Turn o automacally aer a set period of me.
Power Saving
Lower power consumpon if no input source is
detected aer ve (5) minutes.