47
Menu Opon Descripon
Power Indicator
Turns the power indicator light on or o. When turned on,
the power indicator light will be blue when the monitor is
turned on.
Auto Power O
Sets the monitor to automacally turn o aer a certain
amount of me.
Sleep
Sets the amount of idle me before the monitor enters
Sleep mode.
ECO Mode
Adjusts the power consumpon of the monitor.
NOTE: Energy Saving Mode is on by default. Once
turned o, the brightness level can be adjusted
to the maximum level.
DDC/CI
Allows the monitor control via the connected computer’s
graphics card.
HDMI 2.0
Enables HDMI 2.0 support.
NOTE:
• If the monitor shows no video signal via the
HDMI 2.1 port. Please turn on HDMI 2.0. For
addional informaon about HDMI 2.1 support,
contact your graphics card manufacturer.
• HDMI 2.0 supports up to 2560 x 1440 @ 100Hz.
DisplayPort 1.2
Enables DisplayPort 1.2 support.
NOTE: If the monitor shows no video signal via
the DisplayPort (v. 1.4) port. Please turn on
DisplayPort 1.2. For addional informaon
about DisplayPort v. 1.4 support, contact your
graphics card manufacturer.
Standby Charger
When turned on, the USB ports will connue to supply
power even when the monitor is in standby mode.
Memory Recall Resets all sengs to their default values.
To Next Page
Loading...
Need help?
General
