To Next PageTo Next Page
Need help?Do you have a question about the Viking DFBB363 and is the answer not in the manual?
General| Brand | Viking |
|---|---|
| Model | DFBB363 |
| Category | Refrigerator |
| Type | French Door |
| Ice Maker | Yes |
| Water Dispenser | Yes |
| Finish | Stainless Steel |
| Energy Star Certified | Yes |
| Width | 35.75 inches |
General safety instructions and guidelines for installation.
Highlights the importance of reading safety messages and symbols.
Covers DANGER, WARNING, and TIP OVER HAZARD alerts.
Detailed physical measurements for the 36" bottom mount model.
Technical specifications for the 36" bottom mount model.
Required cabinet opening dimensions for the 36" bottom mount model.
Dimensions and location for anti-tip board installation for the 36" model.
Dimensions for custom panels on 36" bottom mount models.
Dimensions for the 36" custom grille on bottom mount models.
Dimensions for the dual 36" custom grille on bottom mount models.
Detailed physical measurements for the 42" side-by-side model.
Detailed physical measurements for the 48" side-by-side model.
Technical specifications for the 42" side-by-side model.
Technical specifications for the 48" side-by-side model.
Required cabinet opening dimensions for the 42" side-by-side model.
Dimensions and location for anti-tip board installation for the 42" side-by-side model.
Required cabinet opening dimensions for the 48" side-by-side model.
Dimensions and location for anti-tip board installation for the 48" side-by-side model.
Dimensions for 42" custom panels on side-by-side models.
Dimensions for 48" custom panels on side-by-side models.
Dimensions for the 42" custom grille on side-by-side models.
Dimensions for the 48" custom grille on side-by-side models.
Detailed physical measurements for the 30" all refrigerator/freezer model.
Detailed physical measurements for the 36" all refrigerator/freezer model.
Technical specifications for 30" and 36" all refrigerator/freezer models.
Required cabinet opening dimensions for the 30" all refrigerator/freezer model.
Dimensions and location for anti-tip board installation for the 30" model.
Required cabinet opening dimensions for the 36" all refrigerator/freezer model.
Dimensions and location for anti-tip board installation for the 36" model.
Detailed physical measurements for dual 30" all refrigerator/freezer units.
Detailed physical measurements for dual 30" and 36" units.
Detailed physical measurements for dual 36" all refrigerator/freezer units.
Technical specifications for dual unit configurations.
Required cabinet opening dimensions for dual 30" units.
Anti-tip board installation for dual 30" units.
Required cabinet opening dimensions for dual 30"/36" units.
Anti-tip board installation for dual 30"/36" units.
Required cabinet opening dimensions for dual 36" units.
Anti-tip board installation for dual 36" units.
Dimensions for 30" custom panels on refrigerator/freezer models.
Dimensions for 36" custom panels on refrigerator/freezer models.
Dimensions for the 30" custom grille on refrigerator/freezer models.
Dimensions for the 36" custom grille on refrigerator/freezer models.
Dimensions for the dual 30" custom grille on refrigerator/freezer models.
Dimensions for dual 30"/36" custom grilles on refrigerator/freezer models.
Illustrates cabinet configurations and clearances for various models.
Details on creating a kickplate notch for custom side panels.
Guidelines for custom panel installation and finishing.
Procedure for removing the ice and water dispenser bezel.
Step-by-step guide for installing custom refrigerator or freezer door panels.
Specific steps for installing custom freezer door panels on bottom mount units.
Procedure for installing the ice and water dispenser bezel.
Instructions for cutting hinge notches in bottom mount custom panels.
Procedure for installing the custom grille assembly and related parts.
Guidelines for ensuring adequate space and clearances for installation.
Specifications for the electrical supply needed for the appliance.
Instructions for securing the unit to prevent tipping.
Guidelines for connecting the water supply and filter system.
Safety precautions and methods for moving the appliance.
Steps for safely unpacking the appliance.
Steps for positioning, leveling, and securing the unit in its final location.
Procedure for adjusting door alignment and securing the unit top.
Steps for attaching the anti-tip support boards to the wall.
Steps for connecting water supply tubing and flushing the system.
Adjusting door stop positions for different model types.
Procedure for installing the kickplate panels and screws.
Steps for installing the water filter cartridge.
Details on water filter performance and tested reductions.
Key operating parameters for the water filter system.
Final steps for grille reassembly and display verification.
Fields for recording installer and company details.
Control panel functions for Bottom Mount and Side-by-Side models.
Control panel functions for All Refrigerator/Freezer models.
Guidelines for service, parts replacement, and registration.
