EasyManua.ls Logo

Viking FDSB5481 - Thermal Cut Out (TCO); Freezer Evaporator Fan

Viking FDSB5481
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Disassembly
©2012 Viking Preferred Service 25
WARNING!
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power source to unit, unless
test procedures require power to be connected. Ensure all ground wires are connected before certifying unit as
repaired and/or operational.
Thermal Cut Out (TCO)
The TCO is a safety device and must NOT
be bypassed. If the TCO is found to be
electrically open, this indicates an overheat
in the ice maker and the ice maker must be
replaced.
TCO
Freezer Evaporator Fan
1. Remove lower freezer baskets.
2. Remove screws securing left and right
freezer glides and remove glides.
Freezer glides
3. Remove right side light lens (see interior
lights page 53).
Light lens
4. Remove screws and center evaporator
cover.
Evaporator Fan Cover

Table of Contents

Other manuals for Viking FDSB5481

Related product manuals