Viking VGR736 - Clearance Dimensions (Wood;Composite Overlay)

11
The bottom of a standard hood should be
30” (76.2 cm) min. to 36” (91.4 cm) max.
above the countertop. This would
typically result in the bottom of the hood
being 66” (167.6 cm) to 72” (182.9 cm)
above the floor. Refer to the range hood
installation instructions for additional
information. These dimensions provide for
safe and efficient operation of the hood.
66”min.
(167.6 cm)
to
72”max.
(182.9 cm)
66”min.
(167.6 cm)
to
72”max.
(182.9 cm)
24”
(61.0 cm)
or
27”
(38.6 cm)
30”
(76.2 cm)
6”
(15.2 cm)
Wood/Composite
Overlay
Wood/Composite
Overlay
30”min.
(76.2 cm)
to
36”max.
(91.4 cm)
0”
(
0 cm)
30”min.
(76.2 cm)
to
36”max.
(91.4 cm)
Wall Installation
Island Installation
Note: This range comes standard with an Island
Trim. There must be a minimum of 6” (15.2 cm)
clearance from rear of range to a combustible
wall or 0” clearance to a non-combustible wall.
Note: Clearances from non-combustible
materials are not part of the ANSI Z21.1 scope
and not certified by CSA. Clearances to non-
combustible materials must be approved by the
authority having jurisdiction.
Note: Minimum clearance for back wall
is 3/4” (1.9 cm) with backguard or high-
shelf.
Clearance Dimensions (Wood/Composite Overlay)