REmovING ANd cLEANING WhEELS
2
4
1
3
INDEPTH CLEANING (RECOMMENDED ONLY
FOR TECHNICALLY COMPETENT PEOPLE)
1 Remove wheels.
2 Disassemble wheels by pushing flaps inwards until cover
comes out.
3 Clean gears and inside chamber very gently with a small, dry
brush.
4 Replace wheel axis back correctly and push cover until it
clips.
Wheels do not need to be cleaned after each use. However,
regular cleaning is recommended to avoid excessive build up
of hair that could damage the Virobi Robot Sweeper.
To Next Page
Loading...
