Why is my Vileda VR 201 PetPro not running?
Your Vileda Vacuum Cleaner might not be running because the battery is too low. Recharge the battery for 6 hours. Alternatively, the dust box may not be correctly inserted; ensure it is properly in place.
What to do if Vileda VR 201 PetPro has low or no suction?
If your Vileda Vacuum Cleaner has low or no suction, it could be due to a full dust box. Empty the dust box. Another possibility is that the filter is blocked with dirt; clean the filter with a brush. Also, check if the filter is missing and put it back in place if necessary.
What to do if Vileda Vacuum Cleaner display shows the error code?
If your Vileda Vacuum Cleaner's display shows an error code, the main brush and side brushes could be blocked. Clean the main brush and side brushes as described in the chapter “Maintenance”. Alternatively, the front wheel and driving wheels might be dirty or blocked; clean these parts as described in the chapter “Maintenance”. Also, check if the charging contacts are dusty and clean them as described in the chapter “Maintenance”. Another reason may be dusty drop sensors, clean them as described in the chapter “Maintenance”. Finally, the fine dust filter could be blocked; clean it as described in the chapter “Maintenance”.
What does error code “L / various / various / various” mean on Vileda VR 201 PetPro Vacuum Cleaner?
The error code “L / various / various / various” on your Vileda Vacuum Cleaner indicates that the motors are overloaded or jammed. Check if the fan opening is free and clean the dust box. Also, check if the wheels or brush unit are stuck or wired by obstacles.
What does error code “E / various / various / various” mean on Vileda VR 201 PetPro?
The error code “E / various / various / various” on your Vileda Vacuum Cleaner indicates that the device is off the ground. Put robot on solid ground. Another possible reason is jammed or dirty sensors. Clean bottom anti-drop sensor lens or clean front bumper sensor lens.
What does error code “A / U / B / N” mean on Vileda VR 201 PetPro?
The error code “A / U / B / N” on your Vileda Vacuum Cleaner means the dust box is not correctly inserted. Remove and reassemble dust box in the robot.
How to fix abnormal movement in Vileda Vacuum Cleaner?
Abnormal movement in your Vileda Vacuum Cleaner may be caused by dirty wheels or drop sensors. Clean the wheels and drop sensors to resolve this issue.
Specifies limitations and conditions for using the robot to ensure safe operation.
Outlines precautions for personal safety when operating the robot, especially for children and adults.
Details critical safety measures related to the robot's electrical components and charging.
Provides guidelines on the safe use, handling, and maintenance of the robot's battery.
General| Type | Robot Vacuum |
|---|---|
| Suitable for Pets | Yes |
| Battery Type | Lithium-Ion |
| Run Time | 90 minutes |
| Dustbin Capacity | 0.5 liters |
| Filter Type | HEPA |
| Features | Auto Recharge |
| Charging Time | 4-5 hours |
| Navigation | Random Navigation |
To Next Page
