REmovING ANd cLEANING WhEELS
21
3
4
recommended that the unit is fully discharged and then com-
pletely recharged at least once a month.
WARNING: Only use a replacement battery as supplied by the
manufacturer.
USER-MAINTENANCE INSTRUCTIONS
REMOVING AND CLEANING WHEELS
1 Turn off the unit.
2 Turn the unit upside down.
3 Pull the wheels gently upwards until they come out.
4 Clean hairs and fluffs out of the wheel axis.
5 Use a small brush to remove dirt out of the wheel profile.
6 Replace wheels by gently pushing them back into the coup-
ler until it clips.
To Next Page
Loading...
