EasyManua.ls Logo

Villaware BVVLESSL01 - UK and Ireland Installation; Plug Installation and Earthing

Villaware BVVLESSL01
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
for u.k. and ireland only
If the plug is not suitable for the socket outlets in your home, it can be removed and
replacedbyaplugofthecorrecttype.Pleasereferto“Installationofaplug”below.
Installation of a plug applicable to U.K. and Ireland.
WARNING - THIS APPLIANCE MUST BE EARTHED
NOTE:
If the terminals in the plug are not marked or if you are unsure or in doubt about
theinstallationoftheplug,pleasecontactaqualiedelectrician.Ifa
1
3A3-pinplugistted,
it must be an ASTA approved plug, conforming to BS
1
363 standard.
Replacement 5A fuses must be BS
1
or ASTA BS
1
362 approved.
The wires in the mains lead are coloured as such:
GREENANDYELLOW-EARTH
BROWN-LIVE
BLUE-NEUTRAL
Pleasenotethatthecolourofthesemainswiresmaynotcorrespondwiththecolour
markings that identify the terminals in your plug.
Pleaseproceedasfollows:
ThewirewhichiscolouredGREENANDYELLOWmustbeconnectedtotheterminal
whichismarkedwiththeletter“E”orbytheearthsymbol“”orcolouredGREENAND
YELLOW.
TheBROWNcolouredwiremustbeconnectedtotheterminal,whichismarkedwiththe
letter“LoriscolouredRED.
The BLUE coloured wire must be connected to the terminal, which is marked with the
letter“N”oriscolouredBLACK.
5 amp

Related product manuals