7
10. Pushdownonthelockinglevertolock
“
”
theportalterinplace.
11.
Placethedriptrayintheunit(Figure7)andthenplacethedripgrillontopofthedriptray
(Figure8).
12.Takethedemitasse(s)fromthecupwarmerandplaceundertheportalter.Ifyouare
brewingtwodemitasses,placethetwosmallcupsundertheportalterensuringeach
one is directly under one of the two spouts.
13. Turn the dial to select the espresso function; manual, single or double shot.
14.PushtheBrewbutton“
” to begin brewing. The light ring will illuminate and remain
steady until the end of the cycle. If the heater temperature has not been reached, the
amberlightringsofthePowerandBrewButtonswillpulseinsynchronization.Ifthe
lever is not in the locked position, the espresso function will not start and the unlock
iconlightwillash.Ifsettomanualmode,thecentrebuttonwillhavetobepushedto
stop the brewing process.
15. The machine will automatically stop after the brew cycle is complete unless it is in the
manualmode“
”.Inmanual,thebrewbutton“
” needs to be pressed to stop the
brewcycle.Pressingthebrewbutton“
”willcancelanycycleinprocess.Oncethe
cycle is off, the amber light will turn off.
Themanualmodecanbeusedtopreparestronger(lesswater)orweaker(more
water)espressoaccordingtoyourpreference.Tomakethestrongestespresso,usethe
doubleshotlterinthemanualmode“
”.
CAUTION: DO NOT LEAVE THE UNIT UNATTENDED WHILE USING THE
MANUAL FEATURE SINCE THE BREWING PROCESS MUST BE STOPPED
MANUALLY. THIS WILL AVOID OVERFLOW, SPILLAGE AND POTENTIAL
HAZARDS AND DAMAGES.
16. After the unit has cooled down, push the lever up to the unlocked position
“
”
and
removetheportalter.Turntheportalterupsidedown,taptoloosentheespresso
groundsanddiscard(Figure9).Slidethelterreleasebuttonbackwardstoreleasethe
lter.Rinseboththelterandportalterwithwater.
17. If you wish to brew additional espresso, repeat the
process.
operating instructions (continued)
Figure 7
Figure 9
Figure 8