8
EN
Description
Interphone made of thermoplastic material with handset. Equipped with four
buttons for the main video door entry functions: door lock release, self-start,
auxiliary services (stair light), ringtone muting and 4 programmable supple-
mentary keys that can execute up to 4 auxiliary functions or intercommuni-
cating calls.
The following settings can be made: ringtone volume, ringtone muting when
“User Away” function is activated and ringtone type selection. Option of set
-
ting different ringtones for calls made from different points, e.g.: outdoor en-
trance panel, door call, intercommunicating call.
LED signalling of “door/gate open” and “Unanswered calls” (up to 4 calls with
interphone in ringtone muted state).
For use in Due Fili Plus systems.
Article 6901/D has a hearing aid function.
Before commencing programming, read the instructions carefully to
get a clear idea of the product’s characteristics, functions and features.
Technical characteristics
• Surface-mounted interphone made of ABS with mirror gloss finish on front
panel.
• Designed for external wall mounting or fitting to a box (can be mounted
directly on the wall using wall plugs or to a Vimar V71303 type unified
3-module rectangular flush-mount back box or a 60 or 70 mm round flush-
mount back box).
• Touch-sensitive keys.
• Power supply from Two-Wire Bus
• Input current:
- on standby: 7mA
- maximum conversation current: 60mA
- peak current limited to call time: 100mA
• Operating temperature: 0° ÷ 40°C
• Electronic chime: different ringtones for panel call, intercom call and door
call.
• 10 different ringtones can be selected.
• Output for additional chime 860A or relay 0170/101.
• Input for door call.
• Interphone 7509 dimensions: 105x180x35 mm
Buttons
A Self-start: for self-start/auto-activation of interphone (to Mas-
ter entrance panel by default).
B
Ringtone muting: Mutes ringtone during call.
C
Door lock: Lock opening command (programming can be
adjusted using the programmer).
D
Auxiliary 1 (Stair light): For auxiliary service (actuator 1 of
relay 69RH or 69PH activated by default).
E1
Button 1: Programmable button to activate auxiliary service
or intercommunicating call (actuator 2 of relay 69RH or 69PH
activated by default).
E2
Button 2: Programmable button to activate auxiliary service
or intercommunicating call.
E3
Button 3: Programmable button to activate auxiliary service
or intercommunicating call (entrance panel function F1 acti-
vated by default, the last entrance panel to make a call).
E4
Button 4: Programmable button to activate auxiliary service
or intercommunicating call (entrance panel function F2 acti-
vated by default, the last entrance panel to make a call).
Signals:
F During normal operation:
- Flashing light: indicates that the interphone is receiving a
call (from outdoor entrance panel or from an intercommuni-
cating device).
- Steady light: ringtone muted.
- Steady light flashing every 10s: if calls have been made
from the entrance panel while the ringtone was muted, the
LED flashes a number of times equal to the number of calls
received from the entrance panel (up to 4 calls are mem-
orised). The flash log is reset when the ringtone volume is
restored.
During programming:
- Flashing light: indicates programming mode.
G
During normal operation:
- Steady light: indicates that the door is open if the sensor
has been installed on at least one entrance panel and con-
nected between terminals PA and M.
During adjustment:
- Flashing light: indicates that ringtone selection or volume
adjustment is in progress.
The instruction manual is downloadable from the site www.vimar.com
Fig. 1
A
C
D
B
E4
E3
E2
E1
G
F
To Next Page
Loading...
Need help?
General
