Vimar ELVOX K40980 - Backup, Restore, and Time Settings

63
K40980 - K40981
EN
• Factory Reset:pageforresettingtheindoorstation(theresetwillresettheindoorstationtotheoriginalfactory
settings):
Figure60
 Note:ifitisnecessarytoperformafactoryresetontheentirevideodoorentrysystem,werecommendthefollowing
procedure:
1) Performafactoryresetoftheslavemonitors
2) Performafactoryresetofthemastermonitors
3) Updatethedipswitchcongurationifnecessary
4) PerformanorderedFactoryResetoftheoutdoorstations,fromtheentrancepanelwithID“1”onwards.
5) Wait1minute
• Backup/restore Settings:pageforsavingandrestoringthesettingsoftheindoorstationontheSDcardinsertedin
themonitorconcerned.Theindoorstationcongurations(e.g.:ringtone,volume,...)aresavedinparticular.
• Time Settings:pageforconguringthesystemdateandtime
Figure 61