VINCENT PHO-111 - Page 25

Vincent 25
CONNECTION OF THE RECORD PLAYER (TURNTABLE)
CONNECTION OF THE AMPLIFIER
Connect the audio cable of the record player to the RCA sockets “IN” (3)
of the PHO 111. Establish a tight connection of the grounding cable at
the clamp “GND” (2). Some record players are not equipped with a
separate grounding cable.
Connect the output sockets “OUT” (5) of the PHO 111 to a standard line
level input of your integrated amplifier or preamplifier. These kind of inputs
are in most cases named “CD”, “TUNER”, “AUX”, “S1” or “LINE1”. Do
never connect an amplifier input that is named “PHONO”!
PHO-111
Amplifier, preamplifier,
receiver
LINE IN
RCA connection
RCA connection
PHO-111