Need help?Do you have a question about the VINCENT PHO-200 and is the answer not in the manual?
General| Type | Phono preamplifier |
|---|---|
| Input Impedance | 47kOhm |
| Output Voltage | 300mV (MM), 30mV (MC) |
| Amplification Factor | 40dB |
| Inputs | RCA |
| Outputs | RCA |
| Frequency Response | 10 Hz - 20 kHz +/- 0.5 dB |
Warning against opening the appliance due to risk of electric shock.
Guidelines for maintenance, modifications, and professional fuse replacement.
Proper procedures for connecting and handling the power cable.
Steps for safely turning off the device before connections.
Details the MC/MM selector switch and ground connection.
Instructions for setting the MC/MM switch based on cartridge type.
Explains the signal input, output, and ground connections.
Details the DC power input socket and connection.
Adjusting the device for MC/MM or high output MC pickup systems.
Instructions for connecting the power supply cable to the device and mains.
Warning to connect the AC adaptor to the mains before switching on.
To Next Page
