VINCENT PHO-200 - Connecting the Record Player; Turntable RCA and Ground Connection; Connecting the Amplifier; Amplifier Line Level Input

Vincent 29
CONNECTION OF THE RECORD PLAYER (TURNTABLE)
CONNECTION OF THE AMPLIFIER
Connect the audio cable of the record player to the RCA sockets “IN” (4)
of the PHO 111. Establish a tight connection of the grounding cable at
the clamp “GND” (6). Some record players are not equipped with a
separate grounding cable.
Connect the output sockets “OUT” (5) of the PHO-200 to a standard line
level input of your integrated amplifier or preamplifier. These kind of inputs
are in most cases named “CD”, “TUNER”, “AUX”, “S1” or “LINE1”.
Do never connect an amplifier input that is named “PHONO”!
RCA connection
Amplifier, Preamplifier or
Receiver
LINE IN
RCA connection
PHO-200
PHO-200