Vincent
19
FRONT VIEW
1. POWER LED of the PHO-300ps
This LED is lit as long as the power supply PHO-
300ps is connected to a vivid power grid (mains
socket) and the device is switched on (6).
2. POWER LED of the PHO-300
This LED is lit as long as the PHO-300 is connec-
ted to the power supply PHO-300ps that is swit-
ched on and ready for use.
3. MC/MM: pickup type switch
At this switch the type of record player pickup
system has to be selected to adapt the phono pre-
amplifier PHO-300 to that system. See section
“Setting the type of pickup system”.
1
2
3
BDA - PHO-300_17.qxp_Bedienungsanleitung 13.11.19 14:55 Seite 19
To Next Page
