Need help?Do you have a question about the VINKA DC22 and is the answer not in the manual?
General| Brand | VINKA |
|---|---|
| Model | DC22 |
| Category | Bicycle Accessories |
| Language | English |
How to turn the E-bike system on and off using the MODE button.
How to switch between different display screens like TRIP, ODO, and Speed.
Activate push-assistance by pressing MODE and DOWN buttons.
Turn the bike light on or off using the LIGHT button.
Change motor output power by selecting assist levels from 0 to 5.
Details on the segmented voltage values and their relation to battery level.
Shows how motor output power is displayed via digital reading.
Indicates where error codes are shown and advises referring to a list.
Wheel size settings (d1A), visible but not editable.
Adjust push assistance speed from 3km/h to 6km/h.
Set top speed limits from 5 to 46 km/h.
Adjust backlight level from 1 (darkest) to 5 (brightest).
Switch between Metric and Imperial units for display.
View the display software version number, which is not adjustable.
View the controller software version number, not adjustable from display.
Clear trip data information by pressing UP and DOWN buttons simultaneously.
Confirm input by short pressing MODE, or save and exit by holding MODE.
To Next Page
