8
苏州万佳电器有限公司
Suzhou wanjia Electric Co.,Ltd.
Push assistant speed settings
PSH refers to push assistant speed settings. The settable range is
3km/h to 6km/h. Press UP/DOWN to increase or decrease the speed
limit to your desired value. Hold the MODE button 1s to confirm and exit
the settings status.
Maximum speed limits(Only read)
SPd refers to top speed limit settings, the settable range is 5 to 46 km/h.
The top speed on the display is reported by the controller. Press UP/DOWN
to increase or decrease the numbers to your desired value. Hold the MODE
buttons 1 seconds to confirm and exit the settings.
Brightness
bLG refers to Backlight level settings. The settable range is 1 2 3 4 5. 1
is the darkest, 3 is standard and 5 is the brightest. The default value is
Push assistant speed settings
To Next Page
Loading...