9
苏州万佳电器有限公司
Suzhou wanjia Electric Co.,Ltd.
decided by the controller when the display leaves factory. Press UP/DOWN
to change the brightness levels. Hold the MODE button to confirm and exit
the settings.
Toggle Unit settings
Unt represents change unit between Metric and Imperial. The
default is “Metric”.
To toggle unit, press the UP button or the Down button to choose
the desired setting item, and then press the MODE button about 1S to
confirm and store a changed setting. Or hold MODE button more than
1S to return to home page.
Display software version
DPS refers to display software version number. The display software
version is not adjustable. It is decided by the software.
To Next Page
Loading...
