11
苏州万佳电器有限公司
Suzhou wanjia Electric Co.,Ltd.
Quality assurance and warranty scope
Ⅰ Warranty
1) The warranty will be valid only for products used in normal usage and conditions.
2) The warranty is valid for 24 months after the shipment or delivery to the customer.
Ⅱ Others
The following cases do not belong to warranty scope:
1) The display is demolished.
2) The damage of the display is caused by wrong installation or operation.
3) The shell of the display is broken after the display is out of the factory.
4) The cable of the display is broken.
5) Beyond warranty period.
6) The fault or damage of the display is caused by the force majeure (e.g., fire,
earthquake, etc.)
Warnings:
1． Use the display with caution. Don’t attempt to release or link the connector when
battery is power on.
2． Try to avoid hitting the display.、
3． Don’t modify system parameters to avoid parameter disorder.
4． Make the display repaired when error code appears.
■This manual instruction is a universal version for VINKA DC22 display. Software specific,
versions of this display may be different. Please always refer to an actual version.
To Next Page
Loading...
