ViOL SYLFIRM X - Specifications and S;W; Error Message and Alarm

SYLFIRM X User Manual(VO-UM-SFX-01)
Rev. 01 Rev. date: 2020-03-16
Uncontrolled When Printed
All Rights Reserved © 2014. VIOL Co., LTD.
Page 24 of 33
4.2 Specifications and S/W of SYLFIRM X
1) SYLFIRM X Specifications
No.
Name
Description
1
Type
General-purpose electric surgical machine
2
Input Voltage
AC100-240V, 50/60 Hz
3
Operating Frequency
2 MHz ± 10%
4
Output
Max 16.0 W ± 20%
5
RF CONDUCT. TIME
Fixed
6
Interval(auto shot)
0.1 ~ 1.0 Sec(0.1 sec unit)
7
Electrode Depth
0.3 mm – 4.0 mm (0.1mm unit)
8
Electrode No.
25 Pin
9
Weight
about 40 Kg
10
Dimension
40cm(W) * 45cm(D) * 35cm(H)
11
Spot Size
1cm²
2) S/W Specifications
Classifications
Contents
SW version
V1.0.2
MCU
ATMEGA 128
Memory Type
Program: FLASH type / Data: SRAM type
Compiler
Codevision AVR C Compiler
Editor
Codevision AVR C Compiler
Debugger
AVR Studio.
Writing Tool
Codevision AVR C Compiler
4.3 Error Message and Alarm
Cause
Classifications
Contents
Hand-piece
equipped
incorrectly or not
at all.
Error message
The below message is displayed on the lower
operation touch screen.
Alarm Loud warning sound
Solution
Alarm disappears if the hand-piece is
successfully reconnected.