SYLFIRM X User Manual(VO-UM-SFX-01)
Rev. 01 Rev. date: 2020-03-16
Uncontrolled When Printed
All Rights Reserved © 2014. VIOL Co., LTD.
Page 23 of 33
vii. Reset of Shot Count
- When you press the 'Shot Count RESET' button located at the lower left of the lower LCD, 'Shot Count'
of the upper LCD is initialized to '0'.
viii. Error Message
- If the hand-piece is not connected properly or has a failure, the lower LCD will display the ERROR
message as shown above.
- In this case, after disconnecting the power, check the hand-piece connection status or reconnect and
turn on the power.
- If the same error message occurs again, contact the sales company.
To Next Page
Loading...