VIOMI Alpha 3 - Operation

12
Power-On/Off
Press “ ” of the main machine for 3s, indicator light is on and the
main machine is on.
When the main machine is not charged and paused, press “ ” for
3s to make it power-off.
Equipment recharge
When the main machine completes cleaning, it will automatically recharge,
and determine whether to clean the mop according to the cleaning mode;
The main machine is outside of the station, press the “ ” buon of the
main machine for a short period of time to start recharging. Aer
recharging successfully, judge whether to clean the mop according to the
cleaning mode.
Vibration mopping mode
Vibration mopping mode is adopted by default when mopping the floor,
which can enhance mopping effect. The mode can be turned off in the APP.
In the power-on state, press the “ ” buon for a short period of
time, and the main machine starts to work.
Cleaning
Water adding or pouring in water tank
Please fill the freshwater tank with clean water before the sweeping and
mopping robot works.
Please pour out the water in the dirtywater tank and clean it up aer the
sweeping and mopping robot works.
Tip: It is forbidden to use cleaning products such as detergent, disinfec-
tant and solid detergent to avoid corrosion and damage to the
equipment.
In the APP, the main machine will automatically save the updated map
aer quick mapping or completing cleaning and successful recharging.
Aer a map is completed successfully, you can split or merge zones or
name any room in the App.
Memory map
Pause
When the main machine is running, press the “ ” buon of the main
machine for a short period of time to stop cleaning, and then press the “
” buon for a short period of time again to continue cleaning.
Model/level selection
In the APP, a variety of cleaning modes and suction gears can be
selected.
Operation