8
Place the cleaning station against the wall and
connect the power line
Remove anti-collision protection strip
Power on and charging
Tips:
Do not expose the cleaning station to direct sunlight.
Please ensure a space of at least 0.5m on both the le and right sides of the
cleaning station, and a space of at least 1.5m in front of it.
Pay aention to the power line, otherwise it may be dragged by the robot, causing
the cleaning station to move or power off.
The freshwater tank, dirtywater tank, and sewage mesh must be installed in place.
Before use, be sure to remove the anti-collision protection strips on
both sides of the main machine.
When using for the first time, please move the main machine to the
charging pole piece and align it with the charging shrapnel of the cleaning
station to charge.
In daily use, directly press the “ ”buon to start intelligent recharging.
＞0.5m
＞0.5m
＞1.5m
Installation
To Next Page
Loading...
