23
Fault Message
Solution
Please pour out the water in the dirtywater tank and clean it up in time.
Make sure the freshwater tank has been
installed
Please install the freshwater tank back and make sure that it is in place.
Please install the dirtywater tank back and make sure that it is in place.
Please clean the sewage mesh and make sure that the sewage mesh is installed in place.
Please check and supplement the freshwater tank.
Please check and clean the cleaning slot.
The power is too low, the mian machine cannot start normally.
Please make sure the dirtywater tank
has been installed
Please make sure the sewage mesh has
been installed
The freshwater tank is empty. Please
add clean water in time
The dirtywater tank is full.
Please clean it up in time
The cleaning slot is full. Please clean
it up in time
Low baery level. Please charge robot.
The main machine can’t sense the position of the cleaning station. Please put the
main machine back to the cleaning station for charging.
Please move the main machine back to
the cleaning station
Troubleshooting
To Next Page
Loading...
