VIOMI V2 max User Manual

10
Connect with Mi Home/Xiaomi Home App
This product works with Mi Home/Xiaomi Home app *. Control your device, and interact it and other smart home devices with Mi Home/Xiaomi Home app.
Scan the QR code to download and install the app. You will be directed to the connection
setup page if the app is installed already. Or search "Mi Home/Xiaomi Home" in the app
Store to download and install it.
Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and then follow prompts to add your device.
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default.
Note:
The version of the app might have been updated, please follow the instructions based on the current app version.
ReseGing Wi-Fi
When switching to a new router or changing your Wi-Fi password, you will need to reset the vacuum-m op's Wi-F i co n n e ctio n . Turn on the
vacuum-mop, then simultaneously press and hold the buGons and for 3 secon ds until you hear a voice saying "Waiting for the network
configuration". Once the Wi-Fi connection is successfully reset, you can reconnect the vacuum-mop.
Note: Only 2.4 GHz Wi-Fi networks are supported.
Restoring Factory SeGings
Press and hold the buGon for 5 seconds. When you hear a voice saying "FactoryseGings will be restored",press andhold thebuGon again for 5 seconds
until it says "Restoring factory seGings". When the seGings are successfully restored, all user data will be cleared, and you will hear a voice saying "Factory seGings
restored successfully".

VIOMI V2 max Specifications

General

Brand	VIOMI
Model	V2 max
Category	Vacuum Cleaner
Language	English