BaGeries and Charging
•
Do not use any third-party baGery, charger, or charging dock. Use
only with<NLD120200W1A4> supply unit.
•
The appliance must be disconnected from the supply mains when
removing thebaGery.
•
This appliance contains baGeries that are only replaceable by skilled
persons.
•
Do not place the charging dock near a heat source, such as a radiator.
•
Do not wipe any part of the vacuum-mop with a wet cloth or other liquid.
•
If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or qualified persons in order to avoid a hazard.
•
Do not improperly dispose of old baGeries. Before discarding the
vacuum-mop, make sure the vacuum-mop is unplugged and the
baGery must be removed and disposed of in an environmentally safe
manner.
•
Makesure the vacuum-mop is turned offwhen being transported
and kept in its original packaging if possible.
•
If the vacuum-mop will not be used for an extended period, fully
charge it, then turn it off and store it in a cool, dry place. Recharge the
vacuum-mop atleast once a month to prevent baGery damage.
This product's laser radar meets the IEC 60825-1:2014 Standard for
Class 1 laser product safety and does notproduce laser radiation
hazardous to the human body.
FCC ID: 2A2DH-V-RVCLM24
Dust Compartment
Sensor Board
To Next Page
Loading...
Need help?
General
