VIOMI V2 max User Manual

8
How toUse
Turning On/Off
When the vacuum-mop is on the charging dock, it will automatically turn on and cannot be turned off.
Tomanually turn on the vacuum-mop,press and hold the buGon untilthe indicator lights up. When the vacuum-mop is in standby mode and not on the
charging dock, press and hold the buGon to turn it off.
Cleaning
Turn the vacuum-mop on, then press the buGon . Depending on the accessory installed, the vacuum-mop will automatically begin vacuuming or
mopping.
Recharging
Turn the vacuum-mop on, then press the buGon to send the vacuum-mop to the dock to recharge.
When the vacuum-mop completes the cleaning task, it will automatically return to the dock for recharging, and the indicator is blinking yellow.
If the vacuum-mop starts running low baGery during a cleaning task, it will automatically return to the charging dock to recharge. Once the vacuum-mop
is fully charged, it will resume cleanup where it leh off.
If the vacuum-mop automatically shuts down due to low baGery, manually place it onto the charging dock, and make sure the charging terminals have a
good contact.
Pausing
While the vacuum-mop is running, press any buGon to pause it, then press the buGon to resume cleaning. Pressing the buGon will end the current
cleaning task and send the vacuum-mop back to the charging dock.
Sleep Mode
The vacuum-mop will automatically enter sleep mode aher 5 minutes of inactivity. To wake it up, press any buGon or use the app.
• The vacuum-mop will not enter sleep mode while on the charging dock.
• The vacuum-mop will automatically turn off aher being in sleep mode for 12 hours.
Fault Status
If the vacuum-mop encounters an error during operation, the indicator will blink red and you will hear a voice alert. To check for a solution, please refer to
the Troubleshooting section.
If no action is taken within 5 minutes, the vacuum-mop will automatically enter sleep mode.
Adding Water or Cleaning Mop During Cleaning
If you need to add more water to the vacuum-mop or clean the mop during a cleaning task, press any buGon to pause the vacuum-mop, then remove the
water reservoir. Aher adding water orcleaning the mop,reinstall the waterreservoir and mop, then press the buGon to resume the cleaning task.

VIOMI V2 max Specifications

General

Brand	VIOMI
Model	V2 max
Category	Vacuum Cleaner
Language	English