9
Section 5: Wall Mounting
This monitor includes screws that may only be used when attaching the
monitor to a mount. No mount or mounting accessory is included.
1. Open the package, take out the product with foam still attached, and gently
place it on a desktop or table. Remove the extra parts and the foam covering the
monitor. If the monitor was already attached to the stand, remove the stand.
Monitor
Stand Base
Foam
Foam
Stand Stem
2. Remove the original screws (
1
) from the opening in the back of the monitor.
Then use the included 4x screws to attach the adapters inside the opening.
- Do not discard the original screws.
- Use only the Screws (
2
) provided.
1
2
4x Screws (included)
4x Screws (original screws)
3. Follow the directions received with your mount, stand, or accessory and install
the monitor on the wall or xture as desired.
Mount
(Not included)
To Next Page
Loading...
Need help?
General
