Viper 4105V - Remote control functions; Standard configuration

Remote
_
rontr_ol
fu
net
ions
________
_
The remote buttons are used to send commands to the system. The but-
tons indicated
below
are for standard configuration.
Standard
configuration
~
Button
The
lock
function
is
controlled
by
pressing
~
on the remote
control
for one second.
When
held
for
approximately
two
seconds, Panic
is
activated.
3
Button
The unlocking function
is
controlled
by
pressing
3 on the remote con-
trol
for one second.
You
can
also
turn
Panic off with this button.
£(Wb.{
Button
Silent Mode™
and
an
optional
auxiliary function are
controlled
by
pressing
£(Wb.{.
Silent
Mode
works
by
pressing
£(Wb.{
for
less
than one
second before locking or unlocking. An
optional auxiliary
function such
as trunk
release
may be
controlled
by
pressing
and
holding
£(Wb.{
for
approximately
two
seconds.
*
Button
The remote start function
of
your system
is
controlled
by
pressing this
button for one second.
*
and
£~
Buttons
Car
Finder
is
controlled
by
pressing these
two
buttons.
4
©
2012
Directed.
All
rights
reserved.