Need help?Do you have a question about the Viper 790XV and is the answer not in the manual?
General| Type | Car Alarm |
|---|---|
| Remote Start | Yes |
| Two-Way Communication | Yes |
| Range | 1 mile |
| Shock Sensor | Yes |
| Keyless Entry | Yes |
| Panic Mode | Yes |
| LED Status Indicator | Yes |
| Channels | 5 |
| Battery Backup | Yes |
| Security Features | Anti-carjacking, starter kill |
| Alarm Features | Siren |
| Compatibility | Most vehicles |
| Warranty | Limited Lifetime |
Detailed explanation of each button and indicator on the remote control.
Includes what is included, important notes, and crucial safety warnings.
Covers system maintenance, battery replacement, and warranty requirements.
Details FCC/ID notices and important cautions regarding vehicle compatibility.
Explains default button functions and describes remote control LCD icons.
Guides on operation, programming, and system signal paging notifications.
Configuring programming mode, page notifications, beep, vibrate, and illumination.
Describes the process of manually arming the security system.
Explains the automatic arming feature that activates after exiting the vehicle.
Details how the system protects the vehicle via door locks and starter kill.
Explains the system's reaction to light impacts on the vehicle.
Details system reactions to various triggers like door or sensor activation.
Instructions for arming and disarming the system while the vehicle is in motion.
Procedures for arming and disarming the system while the vehicle is in motion.
Method to silence and reset a triggered system without fully disarming it.
Manual disarming procedure using the Valet switch if the transmitter is lost or damaged.
Temporarily disables arm/disarm chirps for quiet operation.
Activates siren and flashing lights to attract attention in emergencies.
Temporarily disables arming while allowing convenience features to function.
Instructions for enabling or disabling Valet Mode using the switch or transmitter.
Step-by-step guide to remotely start the vehicle.
Procedures for stopping the remotely started engine safely.
Allows the vehicle to remain running after the key is removed from ignition.
Instructions for setting up automatic timed engine starts.
Procedures for disabling the Timer Mode feature.
Prevents starter engagement during remote start to avoid damage.
How to temporarily disable remote start using a toggle switch.
Monitors engine speed and shuts off the engine if RPMs are too high or too low.
Identifies inputs that will stop remote start operation or prevent it from activating.
Prevents repetitive trigger sequences from false alarms or environmental factors.
Explains how the system reports active inputs during arming (Bypass Notification).
Interprets extra chirps during disarming indicating tamper alerts or NPC activity.
Details siren chirps and remote beeps that report system status (armed, disarmed, alerts).
Lists zone assignments, descriptions, and corresponding LCD icons.
How to interpret LED flashes and LCD icons to identify triggered or bypassed zones.
Explains the security algorithm for changing transmitter codes.
Allows personalized system settings for multiple users.
System stores current state in memory, retaining settings after power loss.
Reduces vehicle battery draw when the system is armed or in Valet Mode.
Lists programmable options like active/passive arming and siren chirp settings.
Details audio sensors, backup battery, and hood lock features for enhanced security.
Automates vehicle door locks, trunk release, and power windows.
System compatibility with Directed Video's multi-channel controller.
Defines control unit, starter kill, inputs, and LED indicators.
Defines remote control, triggered sequence, Valet Switch, Warn Away, and Zone.
To Next Page
