37
© 2002 directed electronics, inc.
disarming diagnostics
Extra chirps that are heard when disarming the system are indi-
cating a Tamper Alert. If four chirps are heard when disarming
the system, a triggered response was generated in your absence.
If five chirps are heard when disarming the system, a zone was
triggered so many times that the Nuisance Protection Circuitry
™
has bypassed that zone. In either case, the status LED and
remote control LCD will indicate which zone was triggered (see
Table of Zones section). The security system will retain this infor-
mation in its memory and chirp four or five times each time it
is disarmed, until the next time that the ignition is turned on.
system status chirps
The siren will chirp when arming/disarming the system. The
pattern of chirps will audibly report the system’s status as
described below.
Action Number of Chirps/ Description
Remote Beeps
Arm 1 System armed
Arm 1 (3-second delay), 1 System armed with
Bypass Notification
Disarm 2 System disarmed
Disarm 4 System disarmed with
Tamper Alert
Disarm 5 System disarmed NPC
active
➜
➜
To Next Page
Loading...
