To Next PageTo Next Page
Need help?Do you have a question about the Viqua VH410-F20 and is the answer not in the manual?
General| Model | VH410-F20 |
|---|---|
| Flow Rate | 18 GPM |
| Maximum Flow Rate | 18 GPM |
| Lamp Power | 60 W |
| Max Pressure | 125 psi |
| Maximum Water Temperature | 104 °F (40 °C) |
| Lamp Life | 9000 hours |
| UV Dose | 40 mJ/cm² |
| Operating Pressure | 125 psi (8.6 bar) |
| Inlet/Outlet Port Size | 1" MNPT |
| Inlet/Outlet Size | 1" MNPT |
| Voltage | 100-240V |
| Operating Temperature | 33-104°F (1-40°C) |
| Certifications | NSF/ANSI |
Explains various safety symbols and their meanings.
Lists critical safety warnings and precautions for operation and installation.
Details the various parts of the UV disinfection system with part numbers.
Provides instructions for installing the UV disinfection system.
Step-by-step guide for sanitizing the plumbing system after installation.
Instructions for replacing the UV lamp, including timer reset.
Procedure for cleaning or replacing the quartz sleeve to maintain UV performance.
Steps for replacing sediment and other filter cartridges.
Overview of BA-ICE-CL controller functions and indicators.
How the controller tracks and displays remaining UV lamp life.
Explains controller fault codes like "A3" and lamp failure alerts.
Lists common display fault codes and their possible causes and solutions.
Details warranty periods for UV chamber, electrical components, lamps, sleeves.
Outlines general terms, limitations, and exclusions for the product warranty.
