65
To save the settings, move the lower arrow to the floppy disk icon located under the
parameters. Press the left or right arrow.
The settings are now saved on the Video 3 parameter. The floppy disk symbol flashes during
backup.
Use the direction arrows to return to the menu.
Menu
Loc OFF/ON:
This option allows the user to switch the transmitter built into the camera head on or off. The
Visioval
®
VX localizer is able to locate the camera head using the signals transmitted by the
transmitter.
• ON: The transmitter is activated.
• OFF: The transmitter is deactivated.
REMARK! After starting the camera, the transmitter is still off, as the camera
current consumption is reduced when the transmitter is off.
Before localizing the camera head with the Localizer, the transmitter must be
activated.
OSD ON/OFF
Switches the main display mode (On Screen Display) on or off. Press 'ON' to display the battery
level and date on screen.
Use the direction arrows to go to the configuration menu. It allows performing the following
settings:
Settings of the configuration menu
Date: Sets the date appearing on the video
Time: Sets the time appearing on the video
Meters / feet: Defines whether the distance measurements are displayed in meters or feet on
screen.
To Next Page
Loading...