ViscoTec preeflow eco-CONTROL EC200 2.0 User Manual

52 / 120 INST-007080 / Eeco-CONTROL EC200 2.0
OPERATION
4.15.2 System Information
Software Update / installing new licences / licences (information)
This area contains system information such as software updates, installing new licences,
information about the licenses and the operating hours counter (Fig. 87).
Software Update / installing new licences
You can obtain a software update or a new licence from your contract partner or, on request,
from the manufacturer.
Due to the file size, you will usually receive a download link for a zip file for the software
update. Unzip this file and save the contents to a USB stick. Updates can be installed on any
dosing control unit with the appropriate existing licence.
In the case of a new licence, you will receive a USB stick. The installation can only be
performed on the corresponding dosing control unit (with the same serial number).
 Connect the USB stick to the USB port on the rear.
Fig. 87 Fig. 88
Fig. 89

ViscoTec preeflow eco-CONTROL EC200 2.0 Specifications

General

Brand	ViscoTec
Model	preeflow eco-CONTROL EC200 2.0
Category	Control Unit
Language	English