7 / 120INST-007080 / E eco-CONTROL EC200 2.0
INTRODUCTION
1 Introduction
Dear customer,
We are delighted that you have decided to purchase a ViscoTec product. We have no doubt
that this product will meet all your requirements. We wish you trouble-free and successful
operation.
The dosing system consists of the eco-CONTROL EC200 2.0 dosing control unit and a
1- or 2-component dispenser. Simultaneous operation of two identical 1-component
dispensers is possible.
This operation manual describes the dosing control unit. A separate operation and
maintenance manual is supplied for the different dispensers.
1.1 Scope of delivery
eco-CONTROL EC200 2.0 dosing control unit, support, power cable, USB stick and
operation and maintenance manual. The 2-component dispenser also includes a set of
adhesive stickers to label the two motors, the plugs, sensors and the supply line.
1.2 Incoming inspection
Damage in transit can lead to malfunctions, and consequently to personal injury and damage
to property. Damaged components must not be put into operation.
Check the delivery immediately on receipt for damage in transit and damage to the
packaging. Check that the delivery is complete according to the enclosed delivery note.
Make sure you have not left any part of the delivery in the packaging.
Compensation for damage during transport may be claimed only if the carrier is notified
immediately.
To Next Page
Loading...
Need help?
General
