Visonic Keyprox - Kp-160; 1 Introduction

2 D-303169 KP-160 PG2 Installation Instructions
1. INTRODUCTION
KP-160 PG2 is a 2-way wireless PowerG control station for the PowerMaster family control
panels. The KP-160 PG2 enables most common everyday user functions:
 Arm and Disarm the alarm system.
 Initiate Emergency, Fire and Panic alarms.
 Control home automation devices.
 Review system status.
 Perform programmable predefined functions.
KP-160 PG2 is operated by a proximity tag. When authorization is required to arm or disarm
the system, the user can present a valid proximity tag to the built-in tag reader.
In addition, the KP-160 PG2 supports panels featuring Partitions. Partitioning allows you to
select up to three controllable areas; each partition can be armed and disarmed
independently regardless of the status of the other two partitions by the same or different
users (see keys marked "7" in the "Icon and Key Indications" Figure).
The KP-160 PG2 can be wall-mounted using the supplied bracket or be used as a portable
unit. For compliance with various international standards, the KP-160 PG2 is equipped with
two tamper switches that can be defined to detect when the cover of the battery
compartment is removed or when the unit is removed from its mounting bracket.
Other features of the KP-160 PG2 include:
 Easy-to-use intuitive graphical touch user interface
 Proximity-tag operated, no need for user to remember codes
 Allows all users' every day actions
 Panel can be installed in hidden location
 8 or 32 per system (depending on the control panel), suitable for any installation
 Status, Alarm, Memory, Trouble and Ready indications.
 Automatic reporting of low battery.
 Back lighting.
 Exit/entry beeps
 Enrollment of proximity tags directly into control panel or via tag reader.
Long battery life expectancy (for typical use).