MGW Ace Decoder HEVC Decoding Appliance
User Manual, Version 1.0 26
Zixi Channels
NOTE:
The Zixi protocol supports two modes:
Zixi Broadcaster Server.
Zixi P2P: Point-to-point streaming directly from the camera or encoder.
When streaming using Zixi Broadcaster Server, the MGW Ace Decoder pulls video from one of the server’s inputs. Enter the
Zixi Server IP address and Stream ID / Password for the associated input (do not attempt to create a new output on the
server).
When streaming directly from an encoder, enter stream port to match the encoder settings.
For Zixi Broadcaster channel:
Enter a Channel Name to differentiate channels within the
Channel list. Channel name is optional.
Select the Ethernet Port from which the channel is received.
Type the Zixi server IP address.
Type the Zixi server port.
Type the channel name entered in Zixi server.
Type the password if required.
Type the latency value for the Broadcaster server. It should
match the latency value that is set on the Zixi Broadcaster.