Need help?Do you have a question about the Vitec Multimedia MGW Ace Decoder OG and is the answer not in the manual?
General| Category | Media Converter |
|---|---|
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% (non-condensing) |
| Video Decoding | H.264, MPEG-2 |
| Audio Decoding | AAC, MP3 |
| Output | HDMI, SDI, IP |
| IP Protocols | UDP, RTP, RTSP, HTTP |
| Management | Web GUI, SNMP, Telnet |
| Video Resolution | Up to 1080p |
| Latency | Low Latency |
| Network Interfaces | Gigabit Ethernet |
Provides scope, disclaimers, and general information about the document's content.
Explains the modular organization of the manual and how to navigate its sections.
Describes the MGW Ace Decoder OG card, its capabilities, and core features.
Lists the required operating systems and internet browsers for the MGW Ace Decoder OG.
Details compatibility with Ross openGear OGX and OG3 chassis and their features.
Explains how Ethernet and Genlock reference inputs are connected to the MGW Ace Decoder OG card.
Details the connectors and signal types on the MGW Ace Decoder OG rear module (DEC-RM1).
Describes the meaning of each LED (Power, Error, Decode, HD, UID) on the MGW Ace Decoder OG card.
Details the connectors (Audio Talkback, USB, Reset) on the front panel of the MGW Ace Decoder OG card.
Guides the physical installation of the MGW Ace Decoder OG card into the chassis.
Guides users on connecting the decoder via Ethernet ports and accessing its web interface.
Explains how to retrieve or set network parameters using a USB thumb drive.
Provides an overview of the user interface and its main functions.
Details the dashboard's display of decoder status, network info, and stream/traffic summary.
Explains how to set and save channels, listing supported protocols like UDP TS, RTP TS, and SRT.
Details how to add and configure channels, including using SAP and manual entry.
Explains how to set up failover channels to switch to a secondary stream if the primary fails.
Describes how to select services based on Service Description Table for DVB-ASI or IP streams.
Explains how to ping a remote appliance to check network reachability.
Details configuration for SRT Listener, Caller, and Rendezvous protocols.
Details configuration for Pro-MPEG channels, including IP address, port, and checksum numbers.
Explains how to forward incoming streams to a UDP TS channel over IP (unicast or multicast).
Configures primary and secondary channel video output resolution, aspect ratio, and format.
Sets audio routing for SDI/HDMI embedded, AES, and analog outputs, including volume control.
Configures decoder clock source, buffer mode, buffer size, latency, and error concealment.
Configures extraction of closed captioning, timecode, AFD, and KLV data from incoming streams.
Enables two-way audio communication between encoder and decoder, configuring server port and gain.
Configures management and streaming via Ethernet ports, including static or DHCP IP addressing.
Sets the device date and time, enabling NTP synchronization and daylight saving.
Manages user passwords, hostnames, and security certificates for the device.
Displays product version, licensing, and hardware revision details.
Displays product version, and status of various licenses like 4K HDR, ULL, and Zixi streaming.
Procedure to restart the MGW Ace Decoder OG device.
Resets all device settings to their default factory values.
Uses the UID LED to locate the MGW Ace Decoder OG card within a populated chassis.
Instructions on how to load license files (.pem format) for the MGW Ace Decoder OG.
Step-by-step guide for upgrading the device firmware using the web interface.
Details regulatory compliance (FCC, CE) and environmental operating conditions.
Describes hardware form factor, chassis compatibility, and stream input support.
Details audio decoding capabilities and supported network streaming protocols.
Describes network interface ports, rear module video outputs, and supported resolutions/frame rates.
Details support for closed captions, timecode, AFD, KLV, and front panel talkback audio.
To Next Page
