Vitec Multimedia MGW Ace Decoder OG - Decoder Settings; Video Output Settings

MGW Ace Decoder OG
User Manual, Version 2.0 35
The Decoder Settings Page
In the Decoder Settings page, below parameters can be set:
 Video Settings
 Audio Settings
 Decoder Settings
 Ancillary Data Settings
 Talkback setting
Figure 6-5: The Decoder Settings Video page
To set the Decoder parameters:
1. From the main menu, select Decoder Settings.
2. Set the desired parameters as required in each section and click Apply.
To set Video parameters:
This section sets video output settings. Video outputs are split into two channels:
 Primary Channel: SDI-1A/B, SDI2 (3G/HD/SD-SDI) and HDMI outputs can be
configured.
 Secondary Channel: SDI2 (SD-SDI) and Composite outputs can be configured.
The Secondary channel is a downscaled version of the primary channel.