Need help?Do you have a question about the Vitec Multimedia MGW Diamond and is the answer not in the manual?
General| Category | Media Converter |
|---|---|
| Resolution Support | Up to 1080p60 |
| Video Inputs | HDMI, SDI |
| Video Outputs | HDMI, SDI |
| Audio Inputs | Embedded audio over SDI/HDMI |
| Audio Outputs | Analog, AES/EBU, Embedded |
| Video Encoding | H.264, H.265 |
| Audio Encoding | AAC |
| Network Interface | Gigabit Ethernet |
| Audio Support | Stereo and 5.1 Surround |
Details the MGW Diamond's capabilities, including HEVC/H.264 encoding and supported standards.
Covers the front and rear panel components, connectors, and indicators of the MGW Diamond.
Instructions for accessing and logging into the MGW Diamond's web-based management interface.
Steps for establishing the initial network connection and configuring the device's IP address.
Explains how to navigate and utilize the various sections of the MGW Diamond's web interface.
Explains using the rear panel reset button for restart, factory reset, or firmware re-load.
Details performing a factory reset through the web interface's General page.
Details the steps for setting up Zixi™ streams, including network and error correction parameters.
To Next Page
