MGW Diamond Multi-Channel HEVC and H.264 Portable Encoder
User Manual, Version 1.6 45
Select this box to enable automatic retrieval of IP address and
DNS server information from the DHCP server.
Enter IPv4 Address if Static mode is selected
Enter Subnet Mask if Static mode is selected
Enter the default Gateway if Static mode is selected
Select either Static, Statefull or Stateless
Displays the link-local IPv6 address.
IPv6 Address
manual/prefix
Enter or edit an IPv6 static address.
Use as Primary Default
Gateway
Select which Ethernet port settings to be used as the default
gateway.
Enter the DNS IP address.
Select this check box to enable system control and status over
the HTTPS REST API.
The web API documentation is available using the information
button or directly at this address:
https://IP_Adress/apidoc.html.
Figure 4-8: The Network Interfaces tab
To Next Page
Loading...
Need help?
General
