MGW Diamond Multi-Channel HEVC and H.264 Portable Encoder
User Manual, Version 1.6 46
To set Security:
Type the current password.
Type the new password (8-14 characters).
Re-type the new password.
The default is mgw-diamond<xxxxxxx> (where the last digits are
the system serial number).
To enable warning and consent banner at login:
Select “Enable Login Banner” check box to enable the warning and consent banner. Once enabled,
type in the text to be displayed or select “DISA default” button. The banner will be displayed at
each login attempt if selected.
“DISA default” automatically sets the text mandated per the US Defense Information Systems
Agency.
To Next Page
Loading...
