MGW Ace Decoder OG
User Manual, Version 2.0 28
Input Channel Configuration
Adding a SAP Channel
MGW Ace Decoder OG allows to manually enter the parameters of a channel. It also supports
the Session Announcement Protocol (SAP) which allows to detect announced streams on a
network for auto channel configuration.
To add a channel using SAP:
1. Click SAP in the Input Channel Configuration page:
2. Select the desired channel row and click Select.
3. The input channel configuration is now populated, add a Channel Name if required
(optional parameter).
To manually add a channel:
If a channel does not appear within the SAP list, the channel can be manually set.
For UDP TS and RTP/RTSP channels:
Parameter Description
Channel
Name
(Optional)
Enter a Channel Name to differentiate channels within the Channel list. The
Channel name is an optional field.
Channel
Input
Select the Channel Input from which the channel is received. Either Ethernet
Port 1, Ethernet Port 2 or DVB-ASI input can be selected.
To Next Page
Loading...
