A test strip was inserted
while the meter was
connected to a computer
or wall outlet.
When the charge is completed
(about 2 hours when charging
an empty battery), remove the
Micro USB cable from the
meter, and then take a test.
Repeat the test and apply
enough sample to fill the test
strip check window.
The test result is above
600 mg/dL.
Wash and dry your hands well
and the test site. Repeat the
test using a new test strip. If
your result still flashes HI,
contact your health care
professional as soon as
possible.
Caution:
Glucose levels above 250 mg/dL may indicate a potential serious medical
condition.
The test result is below
20 mg/dL.
Repeat the test using a new
test strip. If your result still
flashes LO, contact your
health care professional as
soon as possible.
Caution:
Glucose levels below 50 mg/dL may indicate a potential serious medical condition.
To Next Page
Loading...
