EasyManua.ls Logo

VivaChek Fad Sync - Technical Specifications and Warranty; System Specifications and Accuracy Data

VivaChek Fad Sync
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
CHAPTER 5: TECHNICAL INFORMATION
System Specifications
Feature
Specification
Measurement Range
20 to 600 mg/dL
Test Measured
Glucose in fingertip capillary whole blood
Sample
Fresh capillary whole blood
Sample Volume
0.8 µL
Test Time
5 seconds
Power Source
Rechargeable 3.7 Volt Lithium Ion battery
Charging Current
100mAh, Direct current
Battery Type
Rechargeable, non-serviceable, 250mAh, 3.7 Volt DC
nominal, lithium polymer battery (5V input charge
voltage)
Glucose Units of Measure
The meter is pre-set to milligrams per deciliter (mg/dL)
Memory
Up to 500 records with date and time
Automatic Shutoff
2 minutes after last action
Dimensions
82 mm x 54 mm x 23 mm
Display Size
32mm x 32 mm
Weight
Approximately 53g
Operating Temperature
41-113°F
Operating Relative Humidity
10-90% (non-condensing)
Hematocrit Range
VivaChek™ Ino: 20-70%
VivaChek™ Fad: 0-70%
Data Port
Micro USB
Bluetooth
Version 4.1 (syncing with a iPhone for data and time)
The VivaChek™ Fad Sync Blood Glucose monitoring system was tested by XX lay
users using capillary blood samples and three VivaChek™ Ino test strip lots. The
results were compared to the YSI Model 2300 STAT PLUS Glucose Analyzer, a
laboratory instrument. The tables below show how well the two methods
compared.

Related product manuals